AquaSep

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Aviator AQ

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Aviator C18

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Aviator C18 HL

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Aviator C18(2)

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Aviator C4

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Aviator C8

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Aviator Cyano

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromega Z C18

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromega Z C8

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromega Z Phenyl

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromega Z Silica

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond Alkyl Phenyl

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond Amine

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond Amine HD

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond Amine RP

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond Amino Cyano

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond Amino Hexadecyl

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond BAS C18

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond BAS C8

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond BAS Cyano

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond BAS Phenyl

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond C18

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More
Chromegabond C18 BD

ES Industries guard column cartridges offer excellent protection for your column. Adding a guard column to your HPLC system extends the life of your column (up to 400%). When placed between the injector and the column, the guard column traps components that would otherwise irreversibly contaminate the stationary phase of the column, buffer against the effects of aggressive mobile phases and add capacity to your system to ensure no adverse chemical influence on sensitive separations.

The guard column cartridge packing should exactly match the column, using a guard column packed with a stationary phase different from that in the column will provide selective elimination of specific compounds. ES Industries guard column cartridges are packed by a high performance slurry technique and will not reduce system performance and are easy to use and can be changed in seconds. The complete range comprises of analytical (2.0mm I.D. and 3.2mm I.D.), semi-preparative (10mm I.D.) and preparative (30mm I.D.) sizes.

2.0mm I.D. guard cartridges are used for columns with 2.1mm I.D. to 3.0mm I.D. (HPLC, SFC & Chiral)
3.2mm I.D. guard cartridges are used for columns with 3.2mm I.D. to 4.6mm I.D. (HPLC, SFC & Chiral)
10mm I.D. guard cartridges are used for columns with 7.8mm I.D. to 20mm I.D. (HPLC use ONLY)
30mm I.D. guard cartridges are used for columns with 30mm I.D. (HPLC use ONLY)

Please Note: All guard cartridges require the use of appropriate guard cartridge holder

Read More